About Emikon

This author has not yet filled in any details.
So far Emikon has created 26 blog entries.

Profibus-Profinet and Pı Turkey

By |2018-11-27T13:24:05+03:00November 27th, 2018|Profibus_ENG|

Profilebus and Profınet in Turkey PROFIBUS and PROFINET, one of the cornerstones of industrial communication and control, are the established communication standards used in all areas of process and factory automation. PROFIBUS and PROFINET, which have a 25% share in all communication protocols used in the automation sector, have achieved this success; owing to

Profibus – CAN Communication(Anybus AB7312 Gateway)

By |2018-10-09T14:20:04+03:00October 9th, 2018|Genel|

Profibus - CAN Communication(Anybus AB7312 Gateway) You can control your CAN based devices from Profibus PLC/CPUs. E.g. If you have an installion with Siemens PLC but you have motor drivers or barcode readers etc. with CAN communication. AB7312 would solve your communication issues. Saves machine builders and device manufacturers of integrating a PROFIBUS interface

Profibus Network Analysis

By |2018-03-28T10:40:28+03:00January 19th, 2018|Profibus_ENG|

ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks. Thousands of users benefit daily from this tool. ProfiTrace is easy to use and unites all required elements in one to detect several PROFIBUS faults. The following tools are combined to create one simple

Profibus Repeater

By |2018-03-28T10:51:54+03:00January 19th, 2018|Profibus_ENG|

The reputable ProfiHub and ProfiSwitch family is a collection of multichannel PROFIBUS DP network components to create reliable star/tree networks and long multi-device spur lines. This ensures that processes run more efficiently and unplanned downtime is reduced. They are utilized in many applications worldwide and available in different varieties to comply with the specific

Profibus Connectors

By |2018-03-29T00:28:19+03:00January 19th, 2018|Profibus_ENG|

With the aid of a visual connection control, it is also possible to check that the PROFIBUS cable is correctly connected after it is mounted.  The housing is metalized for improved electromagnetic compatibility. The EasyConnect® connector works in the extended ambient temperature range of -25 °C to +85 °C. Additional participants can be connected

USB – CAN Gateway

By |2018-03-29T00:28:56+03:00January 19th, 2018|CANBUS_ENG|

USB-to-CAN V2 Active USB interface 2 x CAN (High-/Low-Speed), LIN With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addressed by the USB-to-CAN V2 – in both the industrial and the automotive sectors. Features

CANbus – Ethernet Bridge

By |2018-03-29T00:29:25+03:00January 19th, 2018|CANBUS_ENG|

Up to 4 x CAN (2 x CAN FD) CAN-Ethernet gateway, bridge and PC interface The CAN@net NT is offered in two variants, as CAN@net NT 200 with two classic CAN channels and as CAN@net NT 420 with four CAN channels, of which two channels can be switched between CAN and CAN FD. Both devices

CANBUS Analyzer

By |2018-03-29T00:29:52+03:00January 19th, 2018|CANBUS_ENG|

XXAT tools combine powerful features with an intuitively operation, due to this they are suitable for developers and service staff.  Under the IXXAT brand, HMS offers a wide range of products for physical and protocol based analysis of CAN-based networks, including the higher layer protocols CANopen, DeviceNet and SAE J1939. In addition, versatile software tools

BACnet – KNX Gateway

By |2018-03-29T00:30:31+03:00January 19th, 2018|Diğer_ENG|

IBBACKNX1000000 (100 points version) IBBACKNX2500000 (250 points version) IBBACKNX6000000 (600 points version) IBBACKNX1K20000 (1200 points version) IBBACKNX3K00000 (3000 points version) DESCRIPTION: The aim of this integration is to make accessible KNX Data points from a BACnet/IP or BACnet MSTP. The BACnet gateway allows other BACnet devices in the network to perform subscription (COV) requests and, also read and write

MPI/PPI/Profibus to Ethernet

By |2018-03-29T00:31:00+03:00January 19th, 2018|Diğer_ENG|

 The NETLink® PRO Compact combines flexibility with a compact design. Power is supplied to the NETLink® through the CPU of the automation device or externally with DC 24 V as an option. The network connection can be used with any standard Cat-5 cable, making cable lengths up to 100 meters feasible without additional components.

Go to Top